Level detector LD-60 Instructions Manual C-MI-LD60 Rev.: 2 English version
2 WORKING PRINCIPLE The LD-60 level switch is based on the variation of the natural resonant frequency of a vibrating fork, when it comes into contac
RECEPTION The LD-60 level detectors are supplied ready for installation and operation. They are supplied packed for their protection during storage
ELECTRICAL CONNECTION The LD-60 can be installed as a detector of minimum or maximum level. The electrical connection is made by means of a DIN 43650-
When the LD-60 is connected to detect a maximum level, the load is “activated” when the fork is not in contact with the product. In the same way, when
MOUNTING The LD-60 detector can be mounted in any position. The more usual insertion points are shown in the drawing. In positions 1 the LD-60 acts as
Nº 00000Test zone24..250 Vac 350 mAIP65maxminLD-61ACCESSORIES An accessory that permits changing the length of the LD-60 which penetrates in the tank
MAINTENANCE The life of the vibrating fork depends basically on the abrasive characteristics of the product used. The LD-60 detector only needs mainte
Comments to this Manuals